Free Shipping on all Inverters, Controllers, E-Panels and Accessories !

 

Magnum Energy MMP250-60S

$1,029.00

Everything in a single, easy to install code compliant pre-wired enclosure.
Designed to work with One Magnum (fits 12VDC or 24VDC models) ME, RD, MS, MS-PAE, MS-AE or other non-magnum inverter/charger.
Free Shipping !

SKU: MMP25060S Categories: ,

Description

Magnum Energy MMP-250-60S

MMP Manual

magnum-energy-the-power-difference2

Standard Features:
Enclosure is steel construction with durable white powder coat finish
Battery/inverter DC disconnect breaker (175 or 250 amps)
Inverter AC input overcurrent protection breakers
Pre-wired AC bypass switch for inverter isolation/battery maintenance
Front mount AC and DC breakers for quick and easy operation
AC and DC ground screw type compression terminals (no lugs required)
500A/50mV DC shunt installed for easy connection to battery status monitor
Easy field wiring with front-mounted AC and DC input/output terminals
Enclosure and components are UL/CSA certified and designated for indoor use
Configurations available for both single 120 VAC and 120/240 VAC systems
DC negative and ground busbars (negative can be isolated if PV-GFP device installed)
Battery positive busbar for DC loads and PV arrays included
Provides mounting for DIN rail or back-mounted DC load/disconnect breakers
Integrates directly with Magnum MS, MS-PAE, and RD Series inverters
Knockouts for inverter and battery cables, PV in/out, DC breakers
Stud terminal available for large DC wire if used as system ground
Data cables with 300-volt rated insulation to allow 240 VAC inverter installations
Inverter hood to allow a Magnum inverter to be mounted vertically

MMP Series Overview

The MMP enclosure is available in four basic configurations. This section lists the four models and the enclosure’s main components and features.

Individual Models:
• MMP175-30D (Mini Magnum Panel, 175 ADC breaker, dual 30 AAC bypass/input breakers)
• MMP175-60S (Mini Magnum Panel, 175 ADC breaker, single 60 AAC bypass/input breakers)
• MMP250-30D (Mini Magnum Panel, 250 ADC breaker, dual 30 AAC bypass/input breakers)
• MMP250-60S (Mini Magnum Panel, 250 ADC breaker, single 60 AAC bypass/input breakers)

Includes a 5 YEAR SYSTEM WARRANTY when Magnum Panel and Magnum Inverter are purchased and setup together.

Optional Accessories/Components:
ME-RC50 – Basic Remote Control with LCD display; allows inverter (or connected accessory) to be configured and monitored, and maintains the critical settings in non-volatile memory.
ME-ARC50 – Advanced Remote Control with LCD display; has all the features of the ME-RC remote, but also configures the advanced features of the inverter (or any connected accessory).
ME-BMK – Battery Monitor; determines battery State of Charge (DC shunt not included).
ME-AGS-N – Automatic Generator Start Controller (Network version); automatically starts/stops generators.
BP-MMP – Metal Back plate; for mounting the Magnum inverter and MMP enclosure.
• DC Breakers – Space for up to four E-Frame/back-mounted (1” width) or eight Q-Frame/DIN rail-mounted (1/2” width) DC breakers.
• MMP-KP – A top cover plate with knockouts to allow other (non-Magnum) inverter installations.

Physical Features:
• MMP dimensions (H x W x D): 18” x 13” x 6.75” (45.7cm x 33cm x 17.1cm)
• MMP weight: 22.5 lbs. (10.2 kg)
• Shipping dimensions (H x W x D): 22” x 15” x 12.5” (56.9cm x 38.1cm x 31.8cm)
• Shipping weight: 31.5 lbs. (14.3 kg)

 

 Shown with Inverter, Remote, Back Plate and Hood

MMP_backplate

Additional information

Weight 10.2 kg
Dimensions 45.7 × 33 × 17.1 cm

Covid-19 update. We are open and here to provide the best service possible during these exceptional times. Shipping times may be slightly delayed.